Nature’s Miracle Hard Floor Cleaner with Stain and Odour Remover

$18.99

Nature’s Miracle Hard Floor Cleaner with Stain and Odour Remover is a bio-enzymatic formula that provides a deep clean while protecting your floor’s natural finish. This dual-action formula removes tough pet stains and odours caused by urine, fecal matter, grease, oil, fats and other organic substrates.

Nature’s Miracle Hard Floor Cleaner with Stain and Odour Remover removes deep-set stains and odours from sealed wood, linoleum, vinyl, concrete and ceramic tile. This spray is completely safe for your pets and home and is available in a 24 oz. bottle.

Why We Recommend Nature’s Miracle Hard Floor Cleaner with Stain and Odour Remover:

  • Great for cleaning pet messes and odours from sealed wood, linoleum, vinyl, concrete and ceramic tile
  • Provides a deep clean
  • Protects your floors natural finish
  • Great for messes caused by urine, fecal matter, grease, oil, fats and other organic substrates

Ingredients:

Water, Cleaning Agents (Surfactants), Bio-Enzymatic Odor-Locking Technology, Fragrance

Directions:

24 OZ SPRAY DIRECTIONS:

  1. Shake well.
  2. Remove excess solid or liquid waste.
  3. Before using, test floor surface by applying to a hidden area; wipe with a cloth. If floor surface finish is removed, do not use.
  4. Always use Nature·s Miracle Dual-Action Hard Floor Stain & Odor Cleaner at full strength.
  5. Apply to stained area, wipe dry and repeat if necessary.
  6. No need to rinse.

DO NOT USE ON VISIBLY WORN, UNSEALED OR UNFINISHED FLOORS.

128 OZ SPRAY DIRECTIONS:

BEFORE USE: 

  1. Shake well before each use.
  2. Remove excess solid or liquid waste.
  3. Peel sticker from flip-top cap and open cap. Discard sticker.
  4. Remove sprayer from its slot beneath the bottle handle and remove and discard plastic wrap. Pull hose tip to completely extend tubing.
  5. Firmly press hose tip into opening in cap until it snaps into place.
  6. Hold sprayer below the level of the container and prime by pumping trigger several times until product is dispensed.
  7. Adjust nozzle to desired setting.
  8. Before using. test floor surface by applying to a hidden area. Wipe with a cloth. If floor surface finish is removed. do not use.

HOW TO USE:

  1. Always use this product at full strength.
  2. Apply to stained area. wait 5 minutes. then wipe dry. Repeat if necessary.
  3. No need to rinse. DO NOT USE ON VISIBLY WORN. UNSEALED OR UNFINISHED FLOORS.

AFTER USE:

  1. To store. turn sprayer nozzle off.
  2. DO NOT disconnect hose.
  3. Return sprayer to its slot. Hose can be pushed back into sprayer handle.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.